PELI-AIR SUITCASES

These Peli Air suitcases combine lightness and sturdyness.

Compared to other polymer suitcases on the market, they are up to 40% lighter without losing their performance.

Most of these Peli - Air products are available in a variety of colours. Please enquire at time of ordering.

This Peli Air case is up to 40% lighter than its competitors on the market. This does not prevent it from having the robustness and solidity specific to the PELI brand.

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and the cover
  • Removable polycarbonate label holder with front or side positioning
  • 180 ° lid opening
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 473 x 254 x 278 mm Exterior dimensions 529 x 321 x 324 mm Bottom depth 152 mm

Lid depth125 mm

Weight without foam 3.2 Kg

Weight with foam 4 Kg

Temperature range-51 ° C / 71 ° C

PELI AIR SUITCASE 1465 MEDICAL CASE WITH FLOOR COMPARTMENTS (Code: VALPC1465EMS-X)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Multi-tiered compartments for your medical products allowing great organizational flexibility
  • Customizable drawer arrangement thanks to removable partitions keeping used and sharp objects in place
  • Removable polycarbonate label holder with front or side positioning
  • 180 ° lid opening
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 473 x 254 x 278 mm Exterior dimensions 529 x 321 x 324 mm Bottom depth 152 mm

Lid depth 125 mm

Weight 3.2 Kg

Temperature range-51 ° C / 71 ° C

EMPTY PELI AIR 1465 SUITCASE (Code: VALPCE1465)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • 180 ° lid opening
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 473 x 254 x 278 mm Exterior dimensions 529 x 321 x 324 mm Bottom depth 152 mm

Lid depth 125 mm

Weight without foam 3.2 Kg

Weight with foam 4 Kg

Temperature range-51 ° C / 71 ° C

PELI AIR SUITCASE 1485 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1485)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

 Interior dimensions 451 x 259 x 156 mm Exterior dimensions 487 x 325 x 175 mm Bottom depth 110 mm

Lid depth 46 mm

Weight without foam 2.1 Kg

Weight with foam 2.4 Kg

Buoyancy 18.6 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1485 WITH TREKPAK  KIT (Code: VALPCTP1485)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • TrekPak kit and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 451 x 259 x 156 mm Exterior dimensions 487 x 325 x 175 mm Bottom depth 110 mm

Lid depth 46 mm

Weight without foam 2.1 Kg

Weight with foam 2.4 Kg

Buoyancy 18.6 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1485 WITH PRE - CUT FOAM (Code: VALPC1485)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 451 x 259 x 156 mm Exterior dimensions 487 x 325 x 175 mm Bottom depth 110 mm

Lid depth 46 mm

Weight without foam 2.1 Kg

Weight with foam 2.4 Kg

Buoyancy 18.6 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR 1485 SUITCASE (Code: VALPCE1485)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

 Interior dimensions 451 x 259 x 156 mm Exterior dimensions 487 x 325 x 175 mm Bottom depth 110 mm

Lid depth 46 mm

Weight without foam 2.1 Kg

Weight with foam 2.4 Kg

Buoyancy18.6 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR SUITCASE  1506  (NEW IN STOCK)  (Code: VALPCE1506)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² ™ polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 475 x 239 x 198 mm Exterior dimensions 511 x 305 x 217 mm Bottom depth 147 mm 

Lid depth 51 mm

Weight without foam 2.4 Kg

Weight with foam 2.9 Kg

Buoyancy 23.4 Kg

Temperature range-51 ° C / 71 ° C

PELI AIR SUITCASE 1507 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1507)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

 Interior dimensions 385 x 289 x 216 mm Exterior dimensions 428 x 358 x 235 mm Bottom depth 165 mm

Lid depth 52 mm

Weight without foam 2.4 Kg

Weight with foam 2.9 Kg

Buoyancy 24.5 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1507 WITH TREKPAK KIT (Code: VALPCTP1507)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • TrekPak kit and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

 Interior dimensions 385 x 289 x 216 mm Exterior dimensions 428 x 358 x 235 mm Bottom depth 165 mm

Lid depth 52 mm

Weight without foam 2.4 Kg

Weight with foam 2.9 Kg

Buoyancy 24.5 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1507 WITH PRE - CUT FOAM (Code: VALPC1507)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

 Interior dimensions 385 x 289 x 216 mm Exterior dimensions 428 x 358 x 235 mm Bottom depth 165 mm

Lid depth 52 mm

Weight without foam 2.4 Kg

Weight with foam 2.9 Kg

Buoyancy 24.5 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR 1507 SUITCASE (Code: VALPCE1507)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 385 x 289 x 216 mm Exterior dimensions 428 x 358 x 235 mm Bottom depth 165 mm

Lid depth 52 mm

Weight without foam 2.4 Kg

Weight with foam 2.9 Kg

Buoyancy 24.5 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1525 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1525)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 521 x 287 x 171 mm Exterior dimensions 558 x 355 x 190 mm Bottom depth 121 mm

Lid depth 51 mm

Weight without foam 2.7 Kg

Weight with foam 3.2 Kg

Buoyancy 26.3 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1525 WITH TREKPAK KIT (Code: VALPCTP1525)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • TrekPak kit and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 521 x 287 x 171 mm Exterior dimensions 558 x 355 x 190 mm Bottom depth 121 mm

Lid depth 51 mm

Weight without foam 2.7 Kg

Weight with foam 3.2 Kg

Buoyancy 26.3 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1525 WITH PRE - CUTE FOAM (Code: VALPC1525)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 521 x 287 x 171 mm Exterior dimensions 558 x 355 x 190 mm Bottom depth 121 mm

Lid depth 51 mm

Weight without foam 2.7 Kg

Weight with foam 3.2 Kg

Buoyancy 26.3 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR 1525 SUITCASE (Code: VALPCE1525)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 521 x 287 x 171 mm Exterior dimensions 558 x 355 x 190 mm Bottom depth 121 mm

Lid depth 51 mm

Weight without foam 2.7 Kg

Weight with foam 3.2 Kg

Buoyancy 26.3 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1535 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1535)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 518 x 284 x 183 mm Exterior dimensions 558 x 355 x 228 mm Bottom depth 132 mm

Lid depth 51 mm

Weight without foam 3.9 Kg

Weight with foam 4.5 Kg

Buoyancy 29.4 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1535 - WITH TREKPAK KIT (Code: VALPCTP1535)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • TrekPak kit and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 518 x 284 x 183 mm Exterior dimensions 558 x 355 x 228 mm Bottom depth 132 mm

Lid depth 51 mm

Weight without foam 3.9 Kg

Weight with foam 4.5 Kg

Buoyancy 29.4 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1535 WITH PRE-CUT FOAM (Code: VALPC1535)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 518 x 284 x 183 mm Exterior dimensions 558 x 355 x 228 mm Bottom depth 132 mm

Lid depth 51 mm

Weight without foam 3.9 Kg

Weight with foam 4.5 Kg

Buoyancy 29.4 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR 1535 SUITCASE (Code: VALPCE1535)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 518 x 284 x 183 mm Exterior dimensions 558 x 355 x 228 mm Bottom depth 132 mm

Lid depth 51 mm

Weight without foam 3.9 Kg

Weight with foam 4.5 Kg

Buoyancy 29.4 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI SUITCASE AIR 1555 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1555)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 584 x 324 x 191 mm Exterior dimensions 629 x 393 x 209 mm Bottom depth 140 mm

Lid depth 51 mm

Weight without foam 3.3 Kg

Weight with foam 4.1 Kg

Buoyancy 36.8 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1555 WITH KIT TREKPAK (Code: VALPCTP1555)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • TrekPak kit and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 584 x 324 x 191 mm Exterior dimensions 629 x 393 x 209 mm Bottom depth 140 mm

Lid depth 51 mm

Weight without foam 3.3 Kg

Weight with foam 4.1 Kg

Buoyancy 36.8 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1555 WITH PRE - CUT FOAM (Code: VALPC1555)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 584 x 324 x 191 mm Exterior dimensions 629 x 393 x 209 mm Bottom depth 140 mm

Lid depth 51 mm

Weight without foam 3.3 Kg

Weight with foam 4.1 Kg

Buoyancy 36.8 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR 1555 SUITCASE (Code: VALPCE1555)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 584 x 324 x 191 mm Exterior dimensions 629 x 393 x 209 mm Bottom depth 140 mm

Lid depth 51 mm

Weight without foam 3.3 Kg

Weight with foam 4.1 Kg

Buoyancy 36.8 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable label holder
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² ™ polymer
  • Proven strength double turn latch
  • Quiet casters with stainless steel ball bearings
  • Does not meet the cabin baggage requirements imposed by airlines
  • Lifetime warranty under conditions

INFORMATION

 Interior dimensions 549 x 273 x 228 mm Exterior dimensions 595 x 343 x 268 mm Bottom depth 177 mm

Lid depth 51 mm

Weight without foam 4.4 Kg

Weight with foam 5.1 Kg

Buoyancy 38.5 Kg

Temperature range-51 ° C / 71 ° C

PELI AIR SUITCASE 1557 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1557)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 440 x 330 x 248 mm Exterior dimensions 487 x 401 x 267 mm Bottom depth 196 mm

Lid depth 51 mm

Weight without foam 3 kg

Weight with foam 3.7 Kg

Buoyancy 36.3 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1557 WITH TREKPAK KIT (Code: VALPCTP1557)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • TrekPak kit and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 440 x 330 x 248 mm Exterior dimensions 487 x 401 x 267 mm Bottom depth196 mm

Lid depth 51 mm

Weight without foam 3 kg

Weight with foam 3.7 Kg

Buoyancy 36.3 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

 

PELI AIR SUITCASE 1557 WITH PRE-CUT FOAM (Code: VALPC1557)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

 Interior dimensions 440 x 330 x 248 mm Exterior dimensions 487 x 401 x 267 mm Bottom depth 196 mm

Lid depth 51 mm

Weight without foam 3 kg

Weight with foam 3.7 Kg

Buoyancy 36.3 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR 1557 SUITCASE (Code: VALPCE1557)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 440 x 330 x 248 mm Exterior dimensions 487 x 401 x 267 mm Bottom depth 196 mm

Lid depth 51 mm

Weight without foam 3 kg

Weight with foam 3.7 Kg

Buoyancy 36.3 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1605 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1605)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 660 x 356 x 213 mm Exterior dimensions 733 x 426 x 232 mm Bottom depth 162 mm

Lid depth 51 mm

Weight without foam 4.2 Kg

Weight with foam 5.3 Kg

Buoyancy 51.2 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1605 WITH TREKPAK KIT (Code: VALPCTP1605)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • TrekPak kit and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 660 x 356 x 213 mm Exterior dimensions 733 x 426 x 232 mm Bottom depth 162 mm

Lid depth 51 mm

Weight without foam 4.2 Kg

Weight with foam 5.3 Kg

Buoyancy 51.2 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1605 WITH PRE-CUT FOAM (Code: VALPC1605)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 660 x 356 x 213 mm Exterior dimensions 733 x 426 x 232 mm Bottom depth 162 mm

Lid depth 51 mm

Weight without foam 4.2 Kg

Weight with foam 5.3 Kg

Buoyancy 51.2 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR 1605 SUITCASE (Code: VALPCE1605)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 660 x 356 x 213 mm Exterior dimensions 733 x 426 x 232 mm Bottom depth 162 mm

Lid depth 51 mm

Weight without foam 4.2 Kg

Weight with foam 5.3 Kg

Buoyancy 51.2 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

 

EMPTY PELI AIR SUITCASE 1606    (NEW IN STOCK)    (Code: VALPCE1606)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² ™ polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 623 x 312 x 260 mm Exterior dimensions 696 x 384 x 300 mm Bottom depth 209 mm

Lid depth 51 mm

 Weight without foam 5.6 Kg

Weight with foam 6.7 Kg

Buoyancy 56.1 Kg

Temperature range-51 ° C / 71 ° C

PELI AIR SUITCASE 1607 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1607)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 535 x 402 x 295 mm Exterior dimensions 613 x 478 x 337 mm Bottom depth 244 mm

Lid depth 51 mm

Weight without foam 6 kg

Weight with foam 7.3 Kg

Buoyancy 80.7 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1607 WITH PRE - CUT FOAM (Code: VALPC1607)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 535 x 402 x 295 mm Exterior dimensions 613 x 478 x 337 mm Bottom depth 244 mm

Lid depth 51 mm

Weight without foam 6 kg

Weight with foam 7.3 Kg

Buoyancy 80.7 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

 

EMPTY PELI AIR 1607 SUITCASE (Code: VALPCE1607)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 535 x 402 x 295 mm Exterior dimensions 613 x 478 x 337 mm Bottom depth 244 mm

Lid depth 51 mm

Weight without foam 6 kg

Weight with foam 7.3 Kg

Buoyancy 80.7 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1615 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1615)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 752 x 394 x 238 mm Exterior dimensions 828 x 467 x 280 mm Bottom depth 187 mm

Lid depth 51 mm

Weight without foam 6.4 Kg

Weight with foam 8 Kg

Buoyancy 76.7 Kg

Temperature range-51 ° C / 71 °


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

PELI AIR SUITCASE 1615 WITH TREKPAK KIT (Code: VALPCTP1615)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • TrekPak kit and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 752 x 394 x 238 mm Exterior dimensions 828 x 467 x 280 mm Bottom depth 187 mm

Lid depth 51 mm

Weight without foam 6.4 Kg

Weight with foam 8 Kg

Buoyancy 76.7 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

 

PELI AIR SUITCASE 1615 WITH PRE - CUT FOAM (Code: VALPC1615)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 752 x 394 x 238 mm Exterior dimensions 828 x 467 x 280 mm Bottom depth 187 mm

Lid depth 51 mm

Weight without foam 6.4 Kg

 Weight with foam 8 Kg

Buoyancy 76.7 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR 1615 SUITCASE (Code: VALPCE1615)

CHARACTERISTICS

Balancing valve to regulate the internal pressure

O-ring to increase the waterproofness of the case against water and dust

Removable polycarbonate label holder with front or side positioning

Shock resistant

Stainless steel hasp guard

2-point padlockable

Rubber over-molded handles

Material: Ultralight HPX² polymer

Proven strength double turn latch

Lifetime warranty under conditions

INFORMATION

Interior dimensions 752 x 394 x 238 mm Exterior dimensions 828 x 467 x 280 mm Bottom depth 187 mm

Lid depth 51 mm

Weight without foam 6.4 Kg

Weight with foam 8 Kg

Buoyancy 76.7 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

 

EMPTY PELI AIR 1626 SUITCASE    (NEW IN STOCK)    (Code: VALPCE1626)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² ™ polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 715 x 358 x 298 mm Exterior dimensions 790 x 433 x 339 mm Bottom depth 247 mm

Lid depth 51 mm

Weight without foam 6.6 Kg

Weight with foam 8.2 Kg

Buoyancy 84.1 Kg

Temperature range-51 ° C / 71 ° C

PELI AIR SUITCASE 1637 - KIT PARTITIONS - ALVEOLEE FOAM (Code: VALPCWD1637)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Kit of movable partitions and honeycomb foam in the cover
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 595 x 446 x 337 mm Exterior dimensions 676 x 525 x 378 mm Bottom depth 284 mm

Lid depth 51 mm

Weight without foam 6.9 Kg

Weight with foam 8.8 Kg

Buoyancy 94.8 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

 

PELI AIR SUITCASE 1637 WITH PRE - CUT FOAM (Code: VALPC1637)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 595 x 446 x 337 mm Exterior dimensions 676 x 525 x 378 mm Bottom depth 284 mm

Lid depth 51 mm

Weight without foam 6.9 Kg

Weight with foam 8.8 Kg

Buoyancy 94.8 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry Heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

EMPTY PELI AIR 1637 SUITCASE (Code: VALPCE1637)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 2-point padlockable
  • Rubber over-molded handles
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 595 x 446 x 337 mm Exterior dimensions 676 x 525 x 378 mm Bottom depth 284 mm

Lid depth 51 mm

Weight without foam 6.9 Kg

Weight with foam 8.8 Kg

Buoyancy 94.8 Kg

Temperature range-51 ° C / 71 ° C


CERTIFICATES

Dry heat
Dust IP6X
IPX7 immersion
Low Temp
 Vibration  Vertical impact

 

PELI AIR SUITCASE 1745 WITH PRE - CUT FOAM (Code: VALPC1745)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Pre-cut foam in the bottom and honeycomb foam in the lid
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 4-point padlockable
  • Rubber over-molded handles
  • Quiet stainless steel bearing wheels
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 1118 x 426 x 202 mm Exterior dimensions 1186 x 492 x 222 mm Bottom depth 139 mm

Lid depth 64 mm

Weight without foam 7.8 Kg

Weight with foam 9.6 Kg

Temperature range-51 ° C / 71 ° C

EMPTY PELI AIR 1745 SUITCASE (Code: VALPCE1745)

CHARACTERISTICS

  • Balancing valve to regulate the internal pressure
  • O-ring to increase the waterproofness of the case against water and dust
  • Removable polycarbonate label holder with front or side positioning
  • Shock resistant
  • Stainless steel hasp guard
  • 4-point padlockable
  • Rubber over-molded handles
  • Quiet stainless steel bearing wheels
  • Material: Ultralight HPX² polymer
  • Proven strength double turn latch
  • Lifetime warranty under conditions

INFORMATION

Interior dimensions 1118 x 426 x 202 mm Exterior dimensions 1186 x 492 x 222 mm Bottom depth 139 mm

Lid depth 64 mm

Weight without foam 7.8 Kg

Weight with foam 9.6 Kg

Temperature range-51 ° C / 71 ° C